background image

www.nordsonefd.com   [email protected]

   800-556-3484    Sales and service of Nordson EFD dispensing systems are available worldwide.

781Mini Series Spray Valve

2

You have selected a reliable, high-quality dispensing system from Nordson EFD, the world leader in fluid 
dispensing. The 781Mini

 spray valve was designed specifically for industrial dispensing and will provide 

you with years of trouble-free, productive service.

This manual will help you maximize the usefulness of your 781Mini valve.

Please spend a few minutes to become familiar with the controls and features. Follow our recommended 
testing procedures. Review the helpful information we have included, which is based on more than 
50 years of industrial dispensing experience.

Most questions you will have are answered in this manual. However, if you need assistance, please do 
not hesitate to contact EFD or your authorized EFD distributor. Detailed contact information is provided 
on the last page of this document.

The Nordson EFD Pledge

Thank You!

You have just purchased the world’s finest precision dispensing equipment.

I want you to know that all of us at Nordson EFD value your business and will do everything in our power 
to make you a satisfied customer.

If at any time you are not fully satisfied with our equipment or the support provided by your Nordson 
EFD Product Application Specialist, please contact me personally at 800.556.3484 (US), 401.431.7000 
(outside US), or 

[email protected]

.

I guarantee that we will resolve any problems to your satisfaction.

Thanks again for choosing Nordson EFD.

Srini Subramanian, General Manager

Srini Subramanian

Содержание 781Mini Series



















Отзывы: