Nordpeis Salzburg XL Series, Руководство по установке

Страница: 17 / 72

17 GB
A. Cleaning
To clean smoke channels follow procedure:
1. Remove covers 22-SAL02-120 – see parts 55-56,
on FIG 57-58.
Attention! When is intended to clean left side chan-
nel, remove right cover and conversely, when clean -
ing right side U channel remove left cover.
2. Remove PO-SAL02-14C – see parts 47-48,
on FIG 49-50.
Attention! When is intended to clean left side
channel, remove right cover and conversely, when
cleaning right side U channel remove left cover.
3. Open – smoke damper and/or bypass damper – by
pulling the levers. See FIG 41 to FIG 44.
Attention! When intended to clean front side
channel open bypass dam
Attention! When intended to clean back side
channel open smoke damper
For cleaning purpose we recommend to use elastic
smoke cleaning implements, with length approximately
2m and 3-4 mm diameter of the cleaning rod. The inter-
nal distance between channel wall is approximately 100
mm. We recommend to use brush made from plastic.
B. Removing smoke channel cleaning remnants.
In order to remove soot remnants and others follow
procedure:
1. Remove Baffle plate – LA-SAL02-050, part 74,
on FIG 76, or part (A) – acc. to the list in Thermotte
subsection.
2. Depends on intended side to be cleaned, remove:
- Left side plate (C) – LA-SAL02-03L, part 73,
on FIG 75,
- Right side plate (D) – LA-SAL02-03R, part 75,
on FIG 77.
3. Depends on intended side to be cleaned, remove:
- Left back plate (G) – LA-SAL02-04L – part 70,
on FIG 72,
- Right back plate (H) – LA-SAL02-04R – part 71,
on FIG 73.
4. Depends on intended side to be cleaned – remove
sweeping hatches:
- Left – PO-SAL02-05C – part 16, on FIG 18.
- Right – PO-SAL02-05C – part 17, on FIG 19.
5.Remove remnants from below sweeping hatch
window by vacuum cleaner.
The cleaning-up actions after smoke channel mainte-
nance perform in reverse order.