Nordmende Transita 320, Руководство пользователя

Страница: 71 / 80

Page 71
DE
EN
9 Other functions
Some system settings are only available in certain playback modes.
To access the advanced functions listed here, the device must be in either DAB or FM mode.
9.1 Factory settings
Follow these steps to reset the factory settings.
Attention: All stored stations and settings will be lost!
>
First open the CD compartment.
> Press and hold the INFO/MENU and STOP/ENTER buttons on the front panel
simultaneously until [Restart] appears on the display. Then the radio
> carries out a new station scan in DAB mode.
9.2 Software version
Under
Menu > [SW version]
you will see the currently installed software version.
9.3 Language
Under
Menu > [Language]
you can use the
up/down arrow keys
to select one of the available
languages. Confirm your selection using the
ENTER button.
9.4 Time
The time is usually read or updated automatically in DAB and FM modes. If no time is displayed,
wait a moment while playing a DAB or FM station. If you would like to adjust the time manually,
first switch the radio to standby mode. Now press the
CLOCK
button on your remote control.
Now you can use the
up/down arrow keys
to enter the time. Press the
CLOCK
button again
after each entry to save the entry.
The time is automatically updated and overwritten when a DAB or FMS station with time
synchronization is selected.
9.5 Equalizer
You can select the equalizer by pressing the
EQ
button. Press the
EQ
button repeatedly
to run through all the equalizer presets available.