Nordmann Engineering Omega Pro 10 Скачать руководство пользователя

Страница: 5 / 64

1.1

To the very beginning

We thank you for having purchased the

Nordmann Omega Pro steam humidifier

The Nordmann Omega Pro steam humidifier incorporates the latest technical ad van ces and meets all

recognized safety standards. Nevertheless, improper use of the Nordmann Omega Pro steam humidifier

may result in danger to the user or third parties and/or damage to property.

To ensure a safe, proper, and economical operation of the Nordmann Omega Pro steam humidifier, please

observe and comply with all information and safety instructions contained in the present documentation

as well as in the separate documentations of the components installed in the humidification system.

If you have questions after reading this documentation, please contact your Nordmann representative.

They will be glad to assist you.

1.2

Notes on the installation manual

Limitation
The subject of this installation manual is the Nordmann Omega Pro steam humidifier in its dif-

ferent versions

. The various options and accessories are only described insofar as is necessary for

proper operation of the equipment. Further information on options and accessories can be obtained in

their respective instructions.

This installation manual is restricted to the

installation

of the Nordmann Omega Pro steam humidifier

and is meant for

well trained personnel being sufficiently qualified for their respective work

This installation manual is supplemented by various separate items of documentation (operation manual,

spare parts list, etc.), which are included in the delivery as well. Where necessary, appropriate cross-

references are made to these publications in the installation manual.

Introduction

Содержание Omega Pro 10

































































Результаты поиска

Содержание Omega Pro 10

Отзывы:

Похожие инструкции для Omega Pro 10

Бренды по названию

Популярные бренды

Nordmann Engineering Omega Pro 10, Руководство по установке

Результаты поиска

Содержание Omega Pro 10

Отзывы:

Похожие инструкции для Omega Pro 10

Бренды по названию

Популярные бренды