TEST OPERATION
5. Observe the test run state of the air conditioner at least 30 minutes.
6. After the successfully test run, return the normal setting and press ON/OFF button on the remote
controller to turn off the unit.
7. Inform the user to read this manual carefully before use, and demonstrate to the user how to use
the air conditioner, the necessary knowledge for service and maintenance, and the reminder for
storage of accessories.
Note:
If the ambient temperature is excess the range refer to section OPERATION INSTRUCTIONS, and it
can not run COOL or HEAT mode, lift the front panel and refer to the emergency button operation
to run the COOL and HEAT mode.
MAINTENANCE
Clean the unit
<40
Disassembly
and
assembly
of filter
When cleaning, you must shut down the machine and cut off the power supply for more
than 5 minutes.
Under no circumstances should the air conditioner be flushed with water.
Volatile liquid (e.g. thinner or gasoline) will damage the air conditioner, so only use soft
dry cloth or wet cloth dipped with neutral detergent to clean the air conditioner.
Pay attention to cleaning the filter screen regularly to avoid dust covering which will
affect the filter screen effect. When the operating environment is dusty, the cleaning
frequency should be increased appropriately.
After removing the filter screen, do not touch the fins of the indoor unit to avoid
scratching.
Tip: Wipe frequently to keep air conditioner clean and good appearance .
Wring it dry Gentle wipe the unit surface
Grasp the raised handle on the filter by hand, and then pull the filter out in the direction
deviating from the unit, so that the upper edge of the filter is separated from the unit.
The filter can be removed by lifting the filter upwards.
When installing the filter, first insert the lower end of the filter screen into the
corresponding position of the unit, and then squeeze the upper end of the filter into the
corresponding buckling position of the unit body.
Warning
Handle
31
Содержание 18K-36K
Страница 1: ......
