9
REMOTE CONTROL
COOLING MODE
HEATING MODE
The cooling function allows the air
conditioner to cool the room and
reduce Air humidity at the same
time.
HEAT
The heating function allows the air
conditioner to heat the room.
To activate the cooling function (COOL), press the
MODE
button until the symbol appears on
the display.
With the button or set a temperature lower
than that of the room.
To activate the heating function (HEAT), press the
MODE
button until the symbol appears on the
display.
With the button or set a temperature higher
than that of the room.
In HEATING operation, the appliance can
automatically activate a defrost cycle, which
is essential to clean the frost on the condenser
so as to recover its heat exchange function.
This procedure usually lasts for 2-10 minutes.
During defrosting, indoor unit fan stop
operation. After defrosting, it resumes to
HEATING mode automatically.
COOL
(For North American market)
If necessary, you can press ECO button 10
times within 8 seconds under heating mode
to start the forced defrosting. It will defrost
the outdoor ice much more fast.
DRY MODE
This function reduces the humidity
of the air to make the room more
comfortable.
DRY
To set the DRY mode, Press
MODE
until
appears in the display. An automatic function of
pre-setting is activated.
FAN MODE (Not FAN button)
FAN
Fan mode, air ventilation only.
To set the FAN mode, press
MODE
until
appears on the display.
AUTO MODE
Automatic mode.
AUTO
To set the AUTO mode, press
MODE
until
appears on the display.
In AUTO mode the run mode will be set
automatically according to the room temperature.
FAN SPEED function (FAN button)
FAN
Change the operating fan speed.
Press
FAN
button to set the running fan speed,
it can be set to AUTO/ MUTE/ LOW/ LOW-MID
/ MID/ MID-HIGH/ HIGH/ TURBO speed circularly.
Child-Lock function
1. Long press
MODE
and
TIMER
button together
to active this function, and do it again to
deactivate this function.
2. Under this function, no single button will active.
(Flash)
Содержание 18K-36K
Страница 1: ......
