14
ADJUSTING THE LEG FRAME
The length of the Leg Frame (10) can be adjusted
to correspond to your height. Pull the Short
Adjustment Knob (37) outward as far as possible.
Slide the Leg Frame (10) into or out of the Backrest
Frame (8) so that the first or second measurement
greater than your height is covered by the Backrest
Frame.
Then, engage the Short Adjustment Knob (37) into
the adjustment holes in the Leg Frame and the
Backrest Frame.
Use the inversion table with the Leg Frame (10)
adjusted to a few different lengths to determine
which length is best for you.
WARNING:
The inversion table
is designed to be used by persons 6 ft. 6 in.
(198 cm) tall or less.
37
8
Adjustment
Hole
Height
Measurements
10
ADJUSTING THE LOCK FRAME
To secure your ankles in the inversion table, first
pull the Long Adjustment Knob (13) outward as far
as possible.
See the inset drawing.
Next, pull the Lock Frame
(11) away from the Leg Frame (10). Stand on the
Foot Frame (19) with the backs of your legs against
the indicated Foam Pads (22) and your toes under
the Lock Frame.
Then, push the Lock Frame (11) against your
ankles and engage the Long Adjustment Knob (13)
into one of the adjustment holes in the Lock Frame.
Make sure that the Long Adjustment Knob is
engaged in one of the adjustment holes in the
Lock Frame.
WARNING:
Make sure that the
Lock Frame (11) is secured snugly against
your ankles before you use the inversion
system. Always wear athletic shoes with
laces to help secure your feet in the inver-
sion system.
13
19
10
10
11
19
22
22
13
