NordicTrack NTEX05119.6 Скачать руководство пользователя страница 3

3

IMPORTANT PRECAUTIONS

    WARNING:

 To reduce the risk of burns, fire, electric shock, or injury to persons, read all 

important precautions and instructions in this manual and all warnings on your studio cycle before 

using your studio cycle. ICON assumes no responsibility for personal injury or property damage 

sustained by or through the use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the studio cycle are ade-

quately informed of all precautions. 

2.  Before beginning any exercise program, 

consult your physician. This is especially 

important for persons over age 35 or persons 

with pre-existing health problems.

3.  The studio cycle is not intended for use by 

persons with reduced physical, sensory, or 

mental capabilities or lack of experience and 

knowledge, unless they are given supervi-

sion or instruction about use of the studio 

cycle by someone responsible for their 

safety.

4.  Use the studio cycle only as described in this 

manual.

5.  The studio cycle is intended for home use 

only. Do not use the studio cycle in a com-

mercial, rental, or institutional setting.

6.  Keep the studio cycle indoors, away from 

moisture and dust. Do not put the studio 

cycle in a garage or covered patio, or near 

water. 

7.  Place the studio cycle on a level surface with 

at least 2 ft. (0.6 m) of clearance around the 

studio cycle. To protect the floor or carpet 

from damage, place a mat under the studio 

cycle.

8.  Inspect and properly tighten all parts each 

time the studio cycle is used. Replace any 

worn parts immediately.

9.  Keep children under age 16 and pets away 

from the studio cycle at all times.

10. When connecting the power cord (see 

page 16), plug the power cord into a 

grounded circuit. 

11. Do not modify the power cord or use an 

adapter to connect the power cord to an 

improper receptacle. Keep the power cord 

away from heated surfaces. Do not use an 

extension cord.

12. Do not operate the studio cycle if the power 

cord or plug is damaged, or if the studio 

cycle is not working properly.

13.  

DANGER:

 

Always unplug the power 

cord and press the power switch to the off 

position when the studio cycle is not in 

use and before cleaning the studio cycle. 

Servicing other than the procedures in this 

manual should be performed by an autho-

rized service representative only.

14. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 

caught on the studio cycle. Always wear ath-

letic shoes for foot protection.

Содержание NTEX05119.6









































Отзывы: