NordicTrack NTEL14416.3 Скачать руководство пользователя страница 7

Страница: 7 / 36

ASSEMBLY

2. With the help of another person, place some

packing inserts from the packing material under

the rear of the Frame (1) so that the Frame is

lifted off the floor. Have another person hold

the elliptical to prevent it from moving from

side to side until this step is completed.

If there are shipping supports attached to the

rear of the Frame (1), remove the screws from

the shipping supports, and discard the screws

and the shipping supports.

Next, attach the Rear Stabilizer (70) to the

Frame (1) with two M10 x 120mm Screws (84).

Then, remove the packing inserts and lower the

Rear Stabilizer.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you finish all assembly steps.

• In addition to the included tool(s), assembly

requires the following tool(s):

one Phillips screwdriver

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

Go to my.nordictrack.com on your computer

and register your product.

  •   documents your ownership
  •   activates your warranty
  •   ensures priority customer support if assistance

is ever needed

Note: If you do not have internet access, call

Customer Care (see the front cover of this

manual) and register your product.

Содержание NTEL14416.3





































Результаты поиска

Содержание NTEL14416.3

Отзывы:

Похожие инструкции для NTEL14416.3

Бренды по названию

Популярные бренды

NordicTrack NTEL14416.3, Руководство пользователя

Результаты поиска

Содержание NTEL14416.3

Отзывы:

Похожие инструкции для NTEL14416.3

Бренды по названию

Популярные бренды