NordicTrack NTEL00909.4, Руководство пользователя

Страница: 22 / 32

22
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, first unplug the power cord.
Lift the Latch (50) on the underside of the Left Pedal
Arm (13), and then lift the Left Pedal Arm off the left
Pedal Arm Sleeve (46).
Next, remove the indicated M8 x 25mm Patch Screw
(121), Large Axle Cover (113), M8 Washer (95), and
Pedal Arm Sleeve (46). Using a flat screwdriver, care-
fully pry the left Disc (17) off the elliptical.
Next, loosen the Pivot Screw (97). Tighten the Belt
Adjustment Screw (85) until the Drive Belt (38) is tight.
When the Drive Belt is tight, tighten the Pivot Screw.
When you are finished, reattach the left disc and the
left pedal arm and then plug in the power cord.
13
50
46
17
95
46
121
113
85
97
38