background image

14

HOW TO EXERCISE ON THE ELLIPTICAL

To mount the elliptical, hold the handlebars and step 

onto the pedal that is in the lower position. Then, step 

onto the other pedal. Push the pedals until they begin 

to move with a continuous motion. Note: The pedals 

can turn in either direction. It is recommended that 

you turn the pedals in the direction shown by the 

arrow; however, for variety, you can turn the pedals 

in the opposite direction.

To dismount the elliptical, wait until the pedals come to 

a complete stop. Note: The elliptical does not have 

a free wheel; the pedals will continue to move until 

the flywheel stops. When the pedals are stationary, 

step off the higher pedal first. Then, step off the lower 

pedal.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks 

slightly on your 

floor during use, 

turn one or both 

of the leveling feet 

beneath the front of 

the frame until the 

rocking motion is 

eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder is designed for use 

with most full-size tablets. Do not place any other 

electronic device or object in the tablet holder. 

To insert a tab-

let into the tablet 

holder, set the 

bottom edge of 

the tablet in the 

tray. Then, pull the 

clip over the top 

edge of the tablet. 

Make sure that 

the tablet is firmly 

secured in the tablet holder. Rotate the tablet holder 

to the desired angle. Reverse these actions to remove 

the tablet from the tablet holder.

Handlebars

Pedals

Leveling 

Foot

Leveling 

Foot

Содержание Freestride Trainer FS3i





























Отзывы: