NordicTrack Freestride Trainer FS3i, Руководство пользователя

Страница: 12 / 28

12
11
12
12. Attach the Tablet Holder (113) to the Console
(4) with four M4 x 16mm Machine Screws (114);
start all the Machine Screws, and then tighten
them.
14. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included.
Place a mat beneath the elliptical to protect the floor.
13. Plug the Power Adapter (103) into the receptacle
on the frame of the elliptical.
Note: To plug the Power Adapter (103) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 13.
Avoid pinching
the wires
4
4
113
114
103
3
45
48
98
11. While a second person holds the Console (4)
near the Console Bracket (3), plug the Main
Wire (45) and the Accelerometer Wire (48) into
the matching receptacles on the back of the
Console.
The connectors on the Main Wire (45) and the
Accelerometer Wire (48) should slide easily
into the receptacles and snap into place. If a
connector does not slide easily into a receptacle,
turn the connector and try again. If you do not
connect the connectors properly, the console
may become damaged.
Insert the excess wire into the Console
Bracket (3).
Tip: Avoid pinching the wires. Attach the
Console (4) to the Console Bracket (3) with four
M4 x 16mm Screws (98); start all the Screws,
and then tighten them.
13