6
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools:
the included hex key(s)
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
1.
Attach the Bench Stabilizer (108) to the Bench
Frame (107) with two M10 x 65mm Carriage
Bolts (121) and two M10 Locknuts (65).
Do not
tighten the Locknuts yet.
Before beginning assembly, read the impor-
tant information in the box above. See the
PART IDENTIFICATION CHART on page 5
for help identifying small parts.
2. Attach the Front Leg (109) to the Bench Frame
(107) with two M10 x 65mm Bolts (82), two M10
Washers (66), and an M10 Locknut (65).
See step 1.
Tighten the M10 Locknuts (65).
65
108
107
121
1
109
82
66
107
65
2
