NordicTrack E5 vi NTEL05609.1 Скачать руководство пользователя

Страница: 16 / 28

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

A moment after you begin pedaling or press a but-

ton, the display will light.

2. Select the manual mode.

Each time you turn

on the console, the

manual mode will

be selected. If you

have selected a

workout, reselect

the manual mode

by pressing the

Workouts button

repeatedly until

zeros appear in the display.

3. Change the resistance of the pedals as

desired.

As you pedal,

change the resis-

tance of the pedals

by pressing the

Digital Resistance

increase and

decrease buttons. Note: After you press the but-

tons, it will take a moment for the pedals to reach

the selected resistance level.

4. Follow your progress with the display.

The lower left dis-

play

—As you

exercise, the lower

left display can

show the elapsed

time and the dis-

tance (total number of revolutions) that you have

pedaled. Note: When a preset workout is selected,

the display will show the time remaining in the

workout instead of the elapsed time.

The lower right

display

—The lower

right display can

show the your ped-

aling speed in

revolutions per

minute (rpm) and the approximate number of calo-

ries that you have burned. Note: When a calorie

goal workout is selected, the display will count

down the number of calories to be burned.

The display also shows your heart rate when you

use the handgrip pulse sensor (see step 5 on page

17).

The upper

display

—The upper

display can show

the elapsed time,

the distance that

you have pedaled,

your pedaling speed, and the approximate number

of calories you have burned.

Press the Priority Display button repeatedly until

the upper display shows the information that you

are most interested in viewing. Note: While infor-

mation is shown in the upper display, the same

information will not be shown in the lower left or

lower right display.

The lower

display

—The lower

display will show a

track representing

640 revolutions (1/4

mile or 400 meters).

As you exercise, indicators will appear in succes-

sion around the track until the entire track appears.

The track will then disappear and the indicators will

again begin to appear in succession.

Adjust the volume level of the console by pressing

the Volume increase and decrease buttons.

Содержание E5 vi NTEL05609.1





























Результаты поиска

Содержание E5 vi NTEL05609.1

Отзывы:

Похожие инструкции для E5 vi NTEL05609.1

Бренды по названию

Популярные бренды

NordicTrack E5 vi NTEL05609.1, Руководство пользователя

Результаты поиска

Содержание E5 vi NTEL05609.1

Отзывы:

Похожие инструкции для E5 vi NTEL05609.1

Бренды по названию

Популярные бренды