NordicTrack Commercial X22i Скачать руководство пользователя

Страница: 33 / 44

SYMPTOM: The walking belt slows when walked on

a. Use only a surge suppressor that meets all of the

specifications described on page 19.

b. If the walking belt is overtightened, treadmill per-

formance may decrease and the walking belt may

become damaged. Remove the key and UNPLUG

THE POWER CORD. Using the hex key, turn both

idler roller screws (C) counterclockwise, 1/4 of a

turn. When the walking belt is properly tightened,

you should be able to lift each edge of the walking

belt 2 to 3 in. (5 to 7 cm) off the walking platform.

Pinch near the foot rail (D) to expose and lift the

edge of the walking belt (see the inset drawing).

Make sure to tuck the edge of the walking belt back

under the foot rail after checking the tension. Be

careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and walk on

the treadmill for a few minutes. Repeat until the

walking belt is properly tightened.

c. Your treadmill features a walking belt coated with

high-performance lubricant. IMPORTANT: Never

apply silicone spray or other substances to

the walking belt or the walking platform unless

instructed to do so by an authorized service

representative. Such substances may deterio-

rate the walking belt and cause excessive wear.

If you suspect that the walking belt needs more

lubricant, see the front cover of this manual.

d. If the walking belt still slows when walked on, see

the front cover of this manual.

SYMPTOM: The walking belt is off-center or slips

when walked on

a. If the walking belt is off-center, first remove the

key and UNPLUG THE POWER CORD. If the

walking belt has shifted to the left, use the hex

key to turn the left idler roller screw clockwise 1/2

of a turn; if the walking belt has shifted to the

right, turn the left idler roller screw counterclock-

wise 1/2 of a turn. Be careful not to overtighten

the walking belt. Then, plug in the power cord,

insert the key, and walk on the treadmill for a few

minutes. Repeat until the walking belt is centered.

The walking belt is centered when both edges are

covered by the foot rails (D).

D D

2–3 in.

Содержание Commercial X22i













































Результаты поиска

Содержание Commercial X22i

Отзывы:

Похожие инструкции для Commercial X22i

Бренды по названию

Популярные бренды

NordicTrack Commercial X22i, Руководство пользователя

Результаты поиска

Содержание Commercial X22i

Отзывы:

Похожие инструкции для Commercial X22i

Бренды по названию

Популярные бренды