NordicTrack CLUB REFLEX Скачать руководство пользователя страница 26

Страница: 26 / 36

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and

follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION:

a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 13). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 13.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

treadmill frame near the power cord. If the switch pro-

trudes as shown, the circuit breaker has tripped. To

reset the circuit breaker, wait for five minutes and

then press the switch to the reset position.

PROBLEM: The power turns off during use

SOLUTION:

a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait

for five minutes and then press the switch to the reset position.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five

minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION:

a. The incline system may need to be calibrated. To initiate the calibration routine, switch the

reset/off circuit breaker to the off position, wait 5 seconds, and then switch the circuit breaker back

to the reset position. During the calibration routine, the treadmill will automatically travel to the high-

est incline level and then return to the initial level.

b. If the incline system still does not function properly, please see the front cover of this manual.

Tripped

Reset

Содержание CLUB REFLEX





































Результаты поиска

Содержание CLUB REFLEX

Отзывы:

Похожие инструкции для CLUB REFLEX

Бренды по названию

Популярные бренды

NordicTrack CLUB REFLEX, Руководство пользователя

Результаты поиска

Содержание CLUB REFLEX

Отзывы:

Похожие инструкции для CLUB REFLEX

Бренды по названию

Популярные бренды