22
•
Your
pace
•
The speed of the walking belt
• The average speed of the walking belt
• A track representing 1/4 mile (400 m)
If desired, adjust the volume
by pressing the volume but-
tons on the console.
To pause the workout, tap the screen or press the
Stop button on the console. To continue the work-
out, touch the Resume button or the Start button.
To end the workout, touch the Finish button.
6. Measure your heart rate if desired.
You can measure your heart rate using either the
handgrip heart rate monitor or a compatible heart
rate monitor.
For information about purchasing
an optional chest heart rate monitor, see
page 25.
The console is compatible with all Bluetooth
®
Smart
heart rate monitors.
Note: If you use both heart
rate monitors at the same time, the Bluetooth
Smart heart rate monitor will have priority.
Before using
the handgrip
heart rate mon-
itor, remove
the sheets of
plastic from the
metal contacts
(C). In addition,
make sure that
your hands are
clean.
To measure your heart rate,
stand on the foot
rails
and hold the contacts with your palms for
approximately ten seconds;
avoid moving your
hands.
When your pulse is detected, your heart
rate will be shown.
For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features several
speed settings. Press the fan
buttons repeatedly to select
a fan speed or to turn on or
turn off the fan.
8.
When you are finished exercising, remove the
key from the console.
Step onto the walking platform and press the Stop
button on the console or tap on the screen. Next,
touch the Finish button. A workout summary will
appear on the screen. If you wish to save your
workout for future use, you can add it as a favor-
ite by touching the heart button in the upper-right
corner of the screen. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord.
IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
C
