NordicTrack 29826.3, Руководство пользователя

Страница: 23 / 36

23
HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to cold
temperatures, allow it to warm to room temperature
before turning on the power. If you do not do this, you
may damage the console displays or other electrical
components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
19). Next, locate the
power switch on the frame
near the power cord. Make
sure that the power switch
is in the reset position.
The display will then light and the console will be ready
for use.
Note: When you turn on the power for the first time,
the ramp will calibrate automatically. The ramp will
move upward and downward as it calibrates. When the
ramp stops moving, the ramp is calibrated.
IMPORTANT: If the ramp does not calibrate auto-
matically, see HOW TO CALIBRATE THE RAMP on
page 28 and manually calibrate the ramp.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER above.
2. Select the manual mode.
Each time you turn on the console, the main menu
will appear.
To select the manual
mode, press the
increase and decrease
buttons next to the Enter
button and highlight
START. Then, press the
Enter button.
If you have selected a workout or the iFit Training
mode, press the Menu button to return to the main
menu.
3. Change the resistance of the pedals and the
incline of the ramp as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons.
Note: After you press the buttons, it will take a
moment for the pedals to reach the selected resis-
tance level.
To vary the motion of the pedals, you can change
the incline of the ramp. To change the incline, press
the Digital Power Ramp increase and decrease
buttons.
Note: After you press the buttons, it will take a
moment for the ramp to reach the selected incline
level.
4.
Follow your progress with the display.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown. Press the Display
button repeatedly to select the desired display
mode.
The display can show the following workout
information:
Calories —This display mode will show the approx-
imate number of calories you have burned.
Profile —When a workout is selected, this display
mode will show a profile of the resistance levels for
the workout.
Pulse —This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5).
Ramp —This display mode will show the incline
level of the ramp for a few seconds each time the
ramp incline changes.
Reset
Position