NordicTrack 29826.3, Руководство пользователя

Страница: 13 / 36

13
7
7. Identify the Right Pedal (14), the Right Pedal
Pad (88), and the Right Pedal Arm (12) assem-
bly and orient them as shown.
Set the Right Pedal Pad (88) on the Right Pedal
Arm (12). Then, set the Right Pedal (14) on the
Right Pedal Pad.
Attach the Right Pedal (14) to the Right Pedal
Arm (12) with two M6 x 12mm Screws (111)
and two M6 Washers (112); do not tighten the
Screws yet.
Next, tighten two M6 x 50mm Screws (62) with
two M6 Washers (112) into the Right Pedal Arm
(12) and the Right Pedal (14). Then, tighten the
two M6 x 12mm Screws (111).
Attach the Left Pedal (not shown) to the Left
Pedal Arm (not shown) assembly in the same
way.
14
88
12
111
112
112
62
8. Apply grease to the axle on the right Crank
Arm (39).
Orient a Pedal Arm Sleeve (46) so that the flat
side is facing the elliptical. Slide the Pedal Arm
Sleeve onto the axle on the right Crank Arm (39).
Attach the Pedal Arm Sleeve (46) with an M8 x
25mm Screw (121), a Large Axle Cover (113),
and an M8 Washer (95). Tip: Avoid damaging
the Large Axle Cover when tightening the
Screw.
Repeat this step on the other side of the
elliptical.
8
95
113
46
Flat
Side
121
Grease
39