background image

Part No. 318024 R0811A

Printed in USA © 2011 ICON IP, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-

vide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED

DRAWING near the end of this manual)

ICON of Canada, Inc. (ICON) warrants this product to be free from defects in workmanship and material,

under normal use and service conditions. The frame and drive motor are warranted for a lifetime. Parts

are warranted for three (3) years from the date of purchase. Labor is warranted for one (1) year from the

date of purchase.

This warranty extends only to the original purchaser (customer). ICONʼs obligation under this warranty is

limited to repairing or replacing, at ICONʼs option, the product through one of its authorized service cen-

ters. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is

shipped to a service center, freight charges to and from the service center will be the customerʼs respon-

sibility. If replacement parts are shipped while the product is under warranty, the customer will be re-

sponsible for a minimal handling charge. For in-home service, the customer will be responsible for a min-

imal trip charge. This warranty does not extend to freight damage to the product. This warranty will auto-

matically be voided if the product is used as a store display model, if all instructions in this manual are

not followed, if the product is abused or improperly or abnormally used, or if the product is used for com-

mercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by

ICON.

ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-

nection with the use or performance of the product; damages with respect to any economic loss, loss of

property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other

consequential damages of any kind. Some provinces do not allow the exclusion or limitation of incidental

or consequential damages. Accordingly, the above limitation may not apply to the customer.

The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of

merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set

forth herein. Some provinces do not allow limitations on how long an implied warranty lasts. Accordingly,

the above limitation may not apply to the customer.

This warranty provides specific legal rights; the customer may have other rights that vary from province

to province.

ICON of Canada, Inc., 900 de lʼIndustrie, St. Jérôme, QC J7Y 4B8

LIMITED WARRANTY

Содержание 29823.0





































Отзывы: