12
77
77
8. If necessary, move the incline trainer to the
desired location (see HOW TO MOVE THE
INCLINE TRAINER on page 29).
After the incline trainer is placed in the location
where it will be used, make sure that the incline
trainer rests firmly on the floor. If the incline
trainer rocks even slightly, turn the Leveling
Feet (77) as needed until the rocking motion is
eliminated.
8
9.
Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 31). To protect the floor or
carpet from damage, place a mat under the incline trainer. To avoid damage to the console, keep the incline
trainer out of direct sunlight.
7. Slide the Right Inside Upright Cover (70) against
the lower end of the right Upright (83). Press
the Right Outside Upright Cover (71) against
the Right Inside Upright Cover until it snaps
into place.
Make sure that the wires are not
pinched.
Attach the Left Inside Upright Cover and the
Left Outside Upright Cover (not shown) in the
same way.
Note: There is not a wire on the left
side.
7
70
71
83
Wires
Содержание 24928.0
Страница 5: ...5 ...
Страница 6: ...6 all STANDARD SERVICE PLANS ...