background image

2

NORDIC

PRODUCT SPECIFICATION

Voltage: 

36V

Rated No Load Speed: 

8,000rpm

Chain Speed:

15m/s

Max Cutting Length:

380mm

Oil Tank:

250ml

Vibration:

5.19m/s

2

, K=1.5m/s

2

A weighted sound pressure level:

LpA: 95.5dB(A) ; KpA=3dB(A)

A weighted sound power level:

LwA: 102.4dB(A) ; KwA=3dB(A)

2x 4.0AH BATTERY REQUIRED 

Not Included

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in 
electric shock, fire and/or serious injury. 
Keep safety warnings and instructions for future reference. 
The term “power tool” in the safety warnings refers to your mains operated (corded) power tool or battery- 
operated (cordless) power tool.

2.0 BEFORE USE

Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
If the machine is new, the battery must first be charged.
Attention! After long time storage, the battery capacity will be reduce.
A new battery or one which has not been used for an extended period achieves full performance only 
after charging and discharging cycles. A substantial drop in operating period per charge indicates that the 
battery is worn out and must be replaced.

PLEASE NOTE IMAGES IN THIS MODEL REFLECT A SIMILAR CHAINSAW 

AND NOT THE FINAL PRODUCT SOME SLIGHT VARIATIONS IN DESIGN 

MAY OCCUR.

PLEASE READ THIS MANUAL BEFORE OPERATION TO PREVENT RISK OF 

INJURY OR IMPROPER USE.

Содержание CHS-B0136





















Отзывы: