6
NORDIC
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables
better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may
cause chain breakage and/or kickback.
• Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge
height can lead to increased kickback.
• The first time user should request an experienced operator in the use of the chainsaw and the protective equipment,
and should be have the initial practice cutting logs on a saw horse or cradle.
• In the interest of personal safety it is highly recommended: when using the chain saw always use it with a residual
current device (RCD) with a tripping current of 30 mA or less.
• Position the cord so that it will not be caught on branches and the like, during cutting.
ATTENTION FOR USAGE OF ELECTRIC CHAIN SAW
• Before any cutting, you must wait for the saw chain running to reach a stable speed.
• When cutting wood, please do not press the chain saw with big force.
• During cutting, if the saw chain is stuck in the wood, please stop the saw immediately, and take the saw out of the
wood carefully. Restart the saw till the saw chain reaches a stable speed, and then re-cut again.
• Operate the machine properly, activate the trigger completely during use. And do not work continuously for a long
time to avoid overuse fatigue.
IMPORTANT SAFETY
How to read symbols
1.
Avoid bar nose contact.
2.
Beware of kick back.
3.
Do not attempt to hold saw with one hand.
4.
Recommended cutting procedure. Hold saw properly with both hands.
ADDITIONAL SAFETY INSTRUCTIONS
FOR BATTERIES AND CHARGERS
Use only batteries and chargers applicable for this machine.
4.1 BATTERIES
• Never attempt to open for any reason.
• Do not store in locations where the temperature may exceed 40 °C.
• Charge only at ambient temperatures between 4 °C and 40 °C.
• When disposing of batteries, follow the instructions given in the section “Protecting the environment”.
