Nordic BS-L0218, Руководство по эксплуатации

Страница: 8 / 16

8
NORDIC
The red light will go off after charging is complete and a green light will appear.
NOTE: Batteries may become warm while charging. This is normal. If the battery is hot after continuous
use in the tool, allow it to cool down to room temperature before charging. This will extend the life of
your batteries.
WARNING: Always disconnect the battery pack from the tool before any assembly, adjustments or
changing accessories.
INSERTION AND REMOVAL OF RECHARGEABLE BATTERY
Depress the battery-release button located on the front of the battery pack to release battery pack.
Pull the battery pack out and remove it from the tool.
WARNING: Always remove the battery pack before making adjustments to the equipment.
Be sure to read the following information before you put the cordless equipment into operation:
Charge the battery pack with the charger. An empty battery pack requires a charging period of approximately
0.5 to 1 hour.
OPERATION OF MAIN UNIT
WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
WARNING: Always remove battery pack from the tool when you are assembling parts, making
adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that
could cause serious personal injury.
WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your eyes and other possible serious injuries.
WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
• Sanding wood, metals, plastics, and other materials
• Smoothing rough boards, chamfering, rounding edges
• Removing rust, paint, varnishes, and stains
WARNING: Always remove the battery pack when attaching, changing, or adjusting sanding belts.
Failure to do so could cause accidental starting, leading to serious personal injury.







