Nordic ATWC Series, Инструкция по установке и обслуживанию, Страница: 50 / 106

PRELIMINARY: 24-Sep-2021 Page 50 002536MAN-00
Menu Tree Continued
ENTER
(From Main)
ENTER
(First Press)
ENTER
(Second Press)
ENTER
(Third Press)
Description
Summer Setback
(only if using
Setpoint Control)
— Enable Setback?
— Enable
Enable summer setback.
— Disable
Disable summer setback.
System EN/DIS — Enable System? — Disable
Disable compressor, auxiliary and ICR.
— Enable
Enable compressor, auxiliary and ICR.
Service Mode — Service Mode?
— No
Do not enter Service Mode.
— Yes
Enter into Service Mode.
EEV Control — EEV1 (Local) — Auto/Manual — Auto
Puts EEV in Auto mode
— Manual
Puts EEV in Manual mode
— Manual Position — EEV Position (%)
Sets EEV to manual position
— EEV2 (Remote)
— Auto/Manual — Auto
Puts EEV in Auto mode
— Manual
Puts EEV in Manual mode
— Manual Position — EEV Position (%)
Sets EEV to manual position
Configuration — Control HYD
— BACnet
BACnet control - see BACnet section
— Signals
Hardwired Signal control
— Setpoints
On-board water temperature control -
see Setpoint Control section.
— Outdoor Reset
(only if using Setpoint
Control)
— Enable
Enables Outdoor Reset functionality
— Disable
Disables Outdoor Reset functionality
— Setpoints Method
(only if using Setpoint
Control)
— ICR
Use Indoor Circulator Relay sampling
— HTS/CTS
Use external temperature sensors
— OD Fan Reduction — Reduction (%) Outdoor fan speed reduction in %.
— Number of Tanks
(only if using Setpoint
control with HTS/CTS)
— One Tank
One tank for heating/cooling functions
— Two Tanks
Separate hot and cold tanks
— Short Cycle — Delay (min)
Short-cycle timer delay in minutes
— Heat/Cool — Delay (min)
Heat / Cool timer delay in minutes
— Units
— Standard
Standard units
— Metric
Metric units (does not affect calibration
units)
— Set Time
— Hours — Hours value
Set the system hours.
— Minutes — Minutes value
Set the system minutes.
— Set Date
— Day — Day value
Set the system day.
— Month — Month value
Set the system month.
— Year — Year value
Set the system year.
Calibration — Suction 1
— calibration adj.
Calibration in 1PSI intervals.
— Discharge 1
— calibration adj.
Calibration in 1PSI intervals.
— Vapour Line 1
— calibration adj.
Calibration in 0.1°F intervals
— Outdoor Ambient
— calibration adj.
Calibration in 0.1°F intervals
— Outdoor IN Temp
— calibration adj.
Calibration in 0.1°F intervals
— Outdoor OUT Temp — calibration adj. Calibration in 0.1°F intervals
— Indoor IN Temp
— calibration adj.
Calibration in 0.1°F intervals
— Indoor OUT Temp
— calibration adj.
Calibration in 0.1°F intervals
NOTE:
Calibration is generally not required. Pressure sensors may be calibrated against a known source if needed. All
temperature sensors have an Auto Calibration feature.
— Time Delays
NEEDS
UPDATE