NS-1024HF
User Guide
P. 5
2.
The parking lights will flash twice and the L.E.D. will go out to confirm that the
doors have been unlocked and that the starter kill feature is disarmed if it was
installed.
Note:
If installed and configured in passive mode at installation, the starter kill feature will
rearm automatically 60 seconds after the doors are unlocked. For that reason, you may
have to unlock your doors a second time if some time elapses before you actually start
the engine.
Priority Door Access
If the remote door locks option is installed on your vehicle, this safety feature allows you
unlock solely the driver’s door with a single press of the
UNLOCK
button on the transmitter;
upon a second press of the
UNLOCK
button, all the other doors will unlock.
Arming the Starter Kill
If installed, the starter kill can be programmed to arm in active mode (will not arm
automatically) or in passive mode (will arm automatically).
•
To disarm
the starter kill in active or passive mode, press the
UNLOCK
button on the trans-
mitter. The parking lights will flash twice. (If remote door Locks were installed, this will also
unlock the doors.) In passive mode, the system will automatically rearm 1 or 3 minutes
after the doors were unlocked.
•
To arm
the starter kill in active or passive mode, press and hold the
LOCK
button on the
transmitter. The parking lights will flash once. (If remote door locks were installed, this will
also lock the doors). In passive mode, the system will automatically arm 1 or 3 minutes
after the engine is shut down.
Installer-programmable Features
The system was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Note:
The programming of these features should be left to a professional. Changing any
one of the settings may adversely affect the operation the module.
The user-selectable options are as follows:
•
Remote door locks
•
Ignition-controlled door locks
•
Secure lock
•
Remote trunk release
•
Engine run time
•
Idle Mode
•
Starter Kill / Anti-Grind
Remote Door Locks Option
Your module can be installed with the remote door locks option.
Ignition-controlled Door Locks Option
This is an added security feature. If your system was installed with the ignition-controlled
door locks option, the doors will automatically be locked as soon as the user presses the
brakes while the ignition key is in the
IGNITION ON (RUN)
position.
When the key is turned to the
IGNITION
OFF
position, the doors will automatically be unlocked.
(Only available if remote door lock option is installed)
