12. Assemble the roll cage (cage + two assembly parts) and attach to the back seat frame. Use
two 4x18 mm screws for the front part and two 4x12 mm for the rear part.
13. Assemble the two lights onto the roll cage with four 4x12 mm screws.
14. Finally, assemble the double seat with two 4x12 mm screws. The car is now ready to be used.
15. See section with description of music and sound panel.
16. Drive without remote: sit down in the seat, set the button between 0 and 1. Power is connected
by pressing 1. If you want to go forward, press the button ”forward”, if you want to go backwards
press the button “back”. To get the car to drive, activate the speeder with the foot. To stop the car,
put the button to the middle position between forward and back.
17. Charging: The charger connects to the outlet under the dash board and connects to your 230
volt outlet in the home.
UK
Charging info:
The battery should be recharged when the car starts to drive slowly. Charge time 8-12 hours.
Never over 16 hours.
The battery becomes hot during recharge, this is normal (under 60 degrees).
It is recommended to only use batteries and chargers delivered by NSH NORDIC A/S.
Do not use old and new batteries at the same time.
Only adults may recharge the battery.
Please charge the batteries at least once a month if the car is not used.