Nordic ID RF651, Руководство пользователя

Страница: 27 / 47

© 2006 Nordic ID oy
RF651 User Manual
Version 1 June 2006
22
���������������
<Add>
User (system integrator) can add Bluetooth devices to the device list manually. By selecting
<Add>
and
pressing
<OK>
button the user can edit the Name and the Bluetooth address of the device and select
<Save>
and press
<OK>
to add it to the device list.
<Search> User (or a representative of the system integrator) can inquire existing and active Bluetooth devices from
within the coverage area. Detected devices can be added to the device list by selecting the desired device
from the “founded devices” list.
<Connect> The RF651 starts to call the selected device in order to create a Bluetooth connection. Connection time will
be about 5 seconds and a short beep sounds once per second while connection is being established.
After the connection is established, the Initial screen appears and the user can start to use the Host Application.
If connection cannot be established with the selected device, an “out of range” status message flashes shortly and three
short beeps are generated by the Hand Terminal.
Try to establish the connection again by selecting <Connect> and pressing the <OK> button again. It may be necessary
to repeat this procedure several times before the selected device is actually detected.
<Save> The user can edit Name and Addr: field manually. After modifying, the user can save information of the device
in to the Hand Terminal memory. Device list appears after selecting <Save> and pressing <OK> button.
<Delete> Deleting a device from the Device list. Device list appears after selecting <Delete> and pressing <OK>
button.
After selecting the desired choice from the list, the user may edit the fields (see below). Edited changes may be saved by
selecting
<Save>
and pressing the
<OK>
button, connection procedure may be initiated by selecting
<Connect>
and
by pressing
<OK>
and the information may be deleted by selecting
<Delete>
and pressing
<OK>
. To move back to the
previous menu level, select
<<
and press
<OK>
.
4.1.2 PIN Code
The default PIN code (factory setting) in Hand Terminals is “
1234
”. The PIN codes of the Hand Terminal and the Access
Server(s) or Dongle must be the same, before they can connect to each other.
Note:
For security reasons, it is recommended to change the PIN code to something different from the too often used
“0000” or “1234”.
Fig. Devices found after the Search -function
Fig.
Connecting to selected device