Nordic ID Group
| Joensuunkatu 7 | FI-24100 Salo |Finland
358 2 727 7700 | Fax + 358 2 727 7720 | [email protected]
30 / 40
2022-04-04
Nordic ID FR22 User Guide
Version 1.0
6.6.
NETWORK SETTINGS
The network settings are a very important section of the Nordic ID FR22 setup, as it will connected to a
network most of the times. Even if it will be connected via USB, the network interfaces must be
configured beforehand, as network is the only way to access the administrator web user interface.
There are three network
interfaces
in the Nordic ID FR22: LAN (Ethernet), WLAN (Wi-Fi) and LTE
(Modem). These can be enabled and disabled in this screen, as well as their network parameters: DHCP
mode, IP address, gateway, and DNS.
Screenshot 12 Network settings screen
There is a section to scan for WLAN networks and add the network to be used to the list of saved
networks entering its SSID and password.
To increase the security of the network connection with the Nordic ID FR22 and avoid security warnings,
you can install your own web server
certificates
in this section.
Screenshot 13 Security warning on the web navigation bar
The web server certificates and SSH public keys can also be exported from this screen.
The network settings also allow to change the
hostname
of the Nordic ID FR22 device, so that it can be
accessed using its hostname instead of its IP address.
