Nordic ID Group
| Joensuunkatu 7 | FI-24100 Salo |Finland
358 2 727 7700 | Fax + 358 2 727 7720 | [email protected]
8 / 20
2018-04-09
Nordic ID AR62 User Guide
Version 1.2
1.8.
PHYSICAL CONNECTORS
Nordic ID AR62 includes the following physical connectors:
•
DC connector for supplying power if PoE capability is not used (power supply sold separately)
•
GPIO connector (4 optically isolated inputs and outputs)
•
4 pcs SMA female antenna connectors for connecting external antennas to the reader
•
USB 2.0 device Type B connector (USB HID profile supported)
•
USB 2.0 host Type A connector
•
Ethernet 10/100Mbps with 802.3af support
•
Dual band WLAN (optional)
•
WWAN cellular connectivity (optional)
•
Slot for mini SIM card (optional)
DC CONNECTOR
DC connector is used to power up the reader using Nordic ID provided power supplies. More information
about the Nordic ID power supplies can found from table 1.3. Supported input voltage is 12 – 24V DC.
GPIO CONNECTOR
Nordic ID AR62 includes a multipurpose GPIO connector that contains the following functionalities:
•
RS-232 serial port
•
4 x opto-isolated inputs
•
4 x opto-isolated outputs
•
+5VDC supply
•
12VDC / 24 VDC supply
12VDC if the reader is powered via PoE and 24VDC if the reader is powered via external power supply.
The multipurpose GPIO connector can be accessed via DE15 connector located on rear panel of the reader.
Pin-out of the DE15 connector can be seen in Figure 1. Functions and electrical specification of the GPIO
connector can be found from
NOTE!
WLAN and 3G are disabled If the reader is powered via the PoE. 802.3af PoE can’t
provide enough power to the reader to keep WLAN and 3G features working as expected.
