Nordic ID Group
| Joensuunkatu 7 | FI-24100 Salo |Finland
358 2 727 7700 | Fax + 358 2 727 7720 | [email protected]
12 / 20
2018-04-09
Nordic ID AR62 User Guide
Version 1.2
LED INDICATORS
Nordic ID AR62 has four programmable LEDs for user indications. Location of the LEDs can be seen in
Picture 6. It’s possible to enable/disable all the LEDs via web management UI and/or reader API. By
default the LEDs are enabled. LEDs of the reader are:
1.
Power LED
2.
Connection LED
3.
RFID LED
4.
Indication LED
Picture 6 Location of LEDs
1.9.1.1.
POWER LED
By default, Power LED indicates if the power is supplied to the device via DC power supply or PoE.
1.9.1.2.
CONNECTION LED
Connection LED indicates whether the reader has established USB, ethernet, WLAN or WWAN
connection. Functionality of the Connection LED can be configured via NUR API if needed. Functionality
of the Connection LED differs depending on whether USB or TCP/IP (ethernet, WLAN and WWAN)
connection is used.
•
USB connection in use
o
LED off: The USB cable is unplugged.
o
LED on: The USB cable is connected.
•
Ethernet, WLAN or WWAN connection in use
o
LED off: The reader has no IP address. In addition, the red error LED is blinking.
