5
1
2
3
4
5
6
7
8
9
16
18
17
10
13 14
15
11
12
Description
1. Hose handle
2. Airflow regulator
3. Floor brush
4. Telescopic tubes
5. Hose
6. Release tab
7. Hose connector
8. Dusk tank release button
9. Suction power control knob
10. Power button
11. Floor brush storage clip
12. Cord rewind button
13. Air outlet grille
14. Air outlet grille latch
15. Power plug
16. Dust tank cover latch
17. Air inlet filter
18. Combination tool (Dusting brush and crevice tool)
Assembly
Always disconnect the appliance from the mains socket before
assembling or disassembling accessories.
Connecting the hose
- To fit the hose, push it firmly into the hose socket on the front
of the appliance until the hose clicks into place.
- To remove the hose, press the release tabs on the hose sides
and pull the hose out of the appliance.
Connecting tubes and accessories
1. Attach the bigger end of the tubes into the hose handle.
2. Adjust the tubes to your desired length.
- Push forward the switch on the tube then adjust. Release the
switch until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessories, hold each piece tightly
and pull firmly apart.
Operation
1. Pull the power cord out of the appliance and insert the mains
plug into the mains socket.
- A YELLOW mark on the power cord indicates the ideal cable
length. Do not extend the power cord beyond the RED mark.
2. Press the power button on top of the appliance to switch on
the appliance. Always set the suction power control knob to the
minimum position before switching the appliance on.
User Manual
EN
