NORDFOREST 46-113, Руководство по эксплуатации

Страница: 62 / 240

62 46-113, 46-114 | 11.2018
Decommissioning and disposal
8 t wood splitter
Decommissioning and disposal
If the machine is no longer operable and is ready for scrapping, you
must deactivate and disassemble it, i.e. you must bring the machine
into a condition whereby it can no longer be used for the purposes for
which it was designed.
›
During the scrapping process, note that the basic materials of the
machine may be reused in the recycling process.
The manufacturing company rejects all responsibility for any
personal injury or material damage that is caused by the reuse
of machine parts, where these are used for any purpose other
than the original material purpose.
Proceed as follows to deactivate the wood splitter:
›
Drain the hydraulic oil from the oil tank and dispose of it in an
environmentally friendly manner.
›
Block all moving machine parts.
›
Disassemble all rubber parts from the machine and take these to
a designated collection point.
›
Disassemble all electrical components and dispose of these
separately to the machine at controlled disposal points.
›
Dismantle the machine into its individual parts and submit all
components to controlled disposal points.
After deactivating and blocking the moving parts, no further residual
risk exists.
When disposing of the wood splitter or its components:
›
Observe the nationally applicable regulations.
Storage
›
Only store the wood splitter in enclosed rooms.
›
Ensure that the storage room is well ventilated and dry.
i