NORDAC SK 150E
10
Technical modifications observed
BU 0100 GB
3.2 Device design
3.2.1 SK 150E-1-O-3D-T125
The SK 150E-1-0 (Mat. No. 275101500) is a soft starter without permanently integrated rectifier. However, it is
possible to install a rectifier by Getriebebau NORD. This can be utilized in case of retrofitting or at system
voltages of < 380 V. Spacer bolts are used for the assembly of the rectifiers. (
Æ
See also chapter 5.1 )
3.2.2 SK 150E-1-BSG2-3D-T125
The design with integrated fast acting brake rectifier has the designation SK 150E-1-BSG2 (Mat. No.
275101505). With this device design, a fast acting brake rectifier has been added to the basic function to
directly control a brake mounted to the motor. Consequently, the brake voltage supplied equals supply voltage
x 0.45. The jumper [L] can be used to affect a gradual switch off by shorting the integrated DC switch. (
Æ
See
also chapter 5.1 )
Potentiometer
[P1 - P4]
see chapter 3.4.2
System input
[L1] [L2] [L3]
PE
Motor terminal
board
Brake rectifier
Bridge [L]
Brake rectifier
Coil
Motor temperature probe
or jumper
Slide switch
Automatic = [ON]
see chapter 3.4.3
Status LEDs
Transparent
screw plug
see chapter 3.4.1
Control unit
[GND]
[+24 VDC]
[OK]
[RUN-RIGHT]
Dip switch
[1 - 4]
see chapter 3.4.2
