Norcold Polar N7LX Скачать руководство пользователя

Страница: 50 / 60

www.norcold.com

Polar Series N7V, N7X, N7XL / N8V, N8X, N8XL

General Diagnostic Information

The diagnostic mode is a tool incorporated within the controls

and can be accessed via the optical display. This tool is designed

to assist in verifying temperature, inputs, outputs, and to retrieve

recorded faults stored by the controls by displaying the various

information via the LCD. Ten (10) screens, each having a particular

function, are used to display this information. For example, screen

three (3) displays the fresh food fin thermistor temperature, and

screens four (4) and five (5) display stored fault history.

The LCD utilizes a dual 7-segment display within the LCD. The

screen number is displayed utilizing the left-side 7-segment dis-

play while inputs, outputs, and various fault related information is

displayed utilizing individual segments of the right-side 7-segment

display. These individual segments will be defined/explained under

each of the individual screen descriptions to follow.

Access Diagnostic Mode

1. Touch and hold both the MODE and the Temperature Set

buttons at the same time for five (5) seconds.

2. Release the MODE and the Temperature Set buttons as

soon as Screen 1, Initial view appears.

3. A few seconds later, Screen 1, Second view appears.

Change Screens

To change screens, press and hold the MODE button until the next

screen displays.

DIAGNOSTIC MODE - N7LX AND N8LX MODELS

Exit Diagnostic Mode

1. Touch and hold both the MODE and the Temperature Set

buttons at the same time for two (2) seconds.

2. Release the MODE and the Temperature Set buttons when

the mode icons and temperature setting once again display.

Turning the refrigerator OFF then back ON also exits the Diagnos-

tic Mode.

SCREEN 1: All Diagnostic Icons ON

■

Verifies all icons are operational by turning them on.

SCREEN 2: All Diagnostic Icons OFF

Touch and release the MODE button to bring up screen 2.

■ Verifies all icons are operational by turning them off.

SCREEN 3: Fresh Food Fin Temperature

Touch and release the MODE button to bring up screen 3.

This screen displays the actual fin temperature being sensed by

the thermistor.

This is not the fresh food cabinet air tempera-

ture

The example shows the fin temperature to be 20°F.

■

If the thermistor is “open,” the second view will show “00”.

■

If the thermistor is “shorted,” the second view will show “99”.

Screens and Diagnostic Segments Information

set

CODE

set

CODE

AUTO

NOR000650A-13

Screen 1

Second view

Screen 1

Initial view

NOR000650A-14

Screen 2

Second view

Screen 2

Initial view

NOR000650A-15

Screen 3

Second view

Screen 3

Initial view

Содержание Polar N7LX





























































Результаты поиска

Содержание Polar N7LX

Отзывы:

Похожие инструкции для Polar N7LX

Бренды по названию

Популярные бренды

Norcold Polar N7LX, Руководство по обслуживанию

Результаты поиска

Содержание Polar N7LX

Отзывы:

Похожие инструкции для Polar N7LX

Бренды по названию

Популярные бренды