Norcold 3163G, Важная информация о продукте

Страница: 9 / 15

6. Pull the burner box away from the refrigerator until the burner, ignition electrode, and
thermocouple are visible.
7. Remove gasket material from the top flange of the burner box.
8. Pull the thermocouple away from the burner box until two clicks are heard.
Do not pull the thermocouple completely out of the burner box.
9. Push the thermocouple into the burner box. The thermocouple tip must be positioned
over the first slot of the burner as illustrated in Figure 6 on page 6.
10. Install the new gasket material around flange of burner box.
Caution: Do not install a damaged gasket. Use care when handling the replacement
gasket material. If torn, a new gasket (Part # 617977) must be ordered.
Call 1-800-543-1219 to place order.
11. Re-attach the burner box to the cooling unit. Insure the gasket remains around the
flange of the burner box.
Burner Shield Installation (Rialta and Eurovan Camper) - Reference Figure 7
12. Remove the screw located on the right front face of the burner box and save it for later
installation.
13. Slide the heat shield between the refrigerator’s cabinet and burner box. It may be
necessary to lift the burner box up to position the burner shield in place. Secure
the heat shield to the burner box with the screw removed in Step 12.
14. Align the side of the heat shield with bottom of the refrigerator’s support bracket. Secure
the heat shield with the two self-tapping screws provided with the kit.
Heat Shield
(Side View)
Heat Shield
Remove this screw and
save for re-installation.
Burner Box
Figure 7 - Heat Shield Installation
7