Norcold 3163G, Важная информация о продукте

Страница: 8 / 15

Installing the Upgrade Kit
Burner Orifice (Rialta and Eurovan Camper) - Reference Figure 6
1. Once the refrigerator is removed from its enclosure, lay the refrigerator on its side with
the cooling unit facing up.
2. Using a 9/16" open-end wrench, loosen and remove the burner tube from the burner orifice.
3. Using a 1/2" open-end wrench, loosen and remove the burner orifice from the burner.
Discard the orifice just removed.
4. Install the orifice received (Red Dot) with the upgrade kit by reversing the above
procedures.
CAUTION: Do not over-tighten the orifice or the burner tube connections. Over-
tightening these connections can result in undue stress and can create
gas leaks.
Burner Box Gasket Installation and Thermocouple Alignment
(Rialta and Eurovan Camper) - Reference Figure 6
5. Using a phillips screw driver, remove the 8 screws securing the burner box to the
cooling unit.
Burner Box Flange
(Remove & Install
Gasket Material Here)
Thermocouple
Burner Tube
Connection
Orifice Connection
Figure 6 - View of Burner Box
6