23
Torque High Limit (THL)
•
This setting is used to define the Upper Set Limit (USL) for a Torque Target. The set value is a
percentage of the Torque Target, so for a Target of 200 with a Torque High Limit of 5% the USL =
210.0. This value is used for PASS/FAIL (OK/NOK) of the torque result.
Command
Response
Example
Torque Low Limit (TLL)
•
This setting is used to define the Lower Set Limit (LSL) for a Torque Target. The set value is a
percentage of the Torque Target, so for a Target of 200 with a Torque Tolerance of 5% the LSL = 190.0.
This value is used for PASS/FAIL (OK/NOK) of the torque result.
Command
Response
Example
SC:THL:?
Set Torque Tolerance (1 – 20%)
OK:?
Confirm Set Torque Tolerance (1 – 20%)
SC:TLL:?
Set Torque Tolerance (1 – 20%)
OK:?
Confirm Set Torque Tolerance (1 – 20%)
