
3. After 3 seconds, the LCD screen will automatically start the check and display the
following
(“CHECK” will flash and the Alternator Icon will light solid)
, indicating the
unit is analyzing the alternator:
4. If the unit detects that the alternator is good, the LCD screen will display the following
(“GOOD” and the Alternator Icon will light solid):
5. If the unit detects that the alternator is out of typical voltage range, the LCD screen
will display the following
(The Fault Icon will flash. “ALT” and the Alternator Icon
will light solid):
6. Press the Mode Selector button again to stop the test and return to the Standby
mode.
Part 2
Under Load (accessories ON):
Next, load the alternator by turning on as many
accessories as possible (Front light, wiper blade, A/C, fan….). This test under load
allow you to check if the alternator is able to supply enough current together to the
battery and electrical accessories of your vehicle.
Refer to the operation as described above.
INSTALLATION
124