35
EN
CAUTION:
Do not use child restraint without the cover.
INSTALLATION
WARNING:
If the child is not secured properly, child could be ejected in a sudden stop or crash,
resulting in serious injury or death.
WARNING:
If in doubt about the installation, consult either the child restraint manufacturer
or the retailer.
GROUP III (22-36 KG)
1.
Place child restraint in proper seating location, flat on the vehicle seat bottom and
touching vehicle seat-back.
2.
Confirm vehicle seating location has its own ISOFIX attachment points (see vehicle
owner’s manual).
NOTE:
If your vehicle does not have the ISOFIX attachments, skip steps 4-5.
3.
Press the ISOFIX button to pull out the two ISOFIX locking arms from the base bottom.
You will hear an audible CLICK!
Ensure that the indicator turns into a red colour, which
means ISOFIX attachments are unlocked.
NOTE:
The ISOFIX attachment points are located between the surface and the backrest of
the vehicle seat.
4.
Align ISOFIX
attachments to the
metal anchorages
at the bottom of the
car seat's backrest
and push it until it
clicks.
You will hear an
audible CLICK! Ensure
both sides of the
ISOFIX locking arms
turn into green safety
colour.
CAUTION:
After the ISOFIX installation check if the child restraint is securely fitted. If the
child restraint is not stable and is shaking, reinstall.
5.
Pull out the belt from the belt ALR.
6.
Guide the shoulder seat belt into red crescent hook.
7.
Route the lap belt under the two sides of armrest. Route the shoulder belt over the
armrest, as shown in the pictures.
NOTE:
Vehicle shoulder belt must be routed above the armrest, lap belt must be routed under
both armrests.
8. Place shoulder portion so that
belt lays properly across child:
on the collar bone, interior (A)
to the shoulder (B).
9.
Fasten the vehicle seat belt.
You will hear an audible CLICK!
Pull the seat belt tight to make
sure it is not twisted.
10. Ensure the shoulder belt runs over your child’s shoulder bone, and not in front of his or her
neck.
11. Make sure seat belt is not twisted and remove slack from seatbelt so it lays flat, smooth
and snug across child in all locations.
WARNING:
If lap and shoulder belt portions of seat belt and seat belt buckle are not all
correctly positioned, restraint is not properly installed as a booster seat.
CAUTION:
The shoulder seat belt section must run diagonally backward. You can adjust the
course of the belt with your vehicle's adjustable belt deflector on both sides.
CLICK