Norac UC5 CANbus, Быстрое руководство

Страница: 5 / 18

2
2 Technical Specifications
CAN ICES ‐ 3(A)/NMB ‐ 3(A)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at their own expense.
This Class A digital apparatus complies with Canadian ICES ‐ 003.
Pursuant to EMC Directive – Article 9, this product is not intended for residential use.
Table 1: System Specifications
Supply Voltage (rated) 12VDC
Supply Current (rated) 10A
Hydraulic Pressure (maximum) 3300 psi
Baud Rate 250 kbps
Clock Frequency (maximum) 96 MHz
Solenoid Valve PWM Frequency 300 Hz
Ultrasonic Sensor Transmit Frequency 50 kHz
Operating Temperature Range 0°C to 80°C
The 10A fuse on the power cable may be replaced by the operator if needed. The replacement
fuse must be rated to blow in less than 120 seconds at 200% and be ANSI/UL248 ‐ 14 or better.
Table 2: Replacement Fuse
NORAC Part Number 106676
Manufacturer Part Number Littelfuse – 0287010.PXCN
The UC5™ product line is covered by multiple patents including, but not limited to the
following:
U.S. Pat. No: US 2004158381
European Pat. No: EP1444894
Canadian Pat. No: CA2418610