19
7
Electrical Installation
1.
Locate the valve module installed on the NORAC valve block. Remove the plugs installed
in positions 7 and 8.
2.
Connect the 2 pin connector on cables C10 into positions 7 and 8 on the valve module.
Connect the other end of cables C10 to the 2 pin connectors on the NORAC expansion
block (V70).
3.
Connect the active roll sensor (E05) to the 8-way coupler (E11) using cable C04 and a 2-
way coupler (E12).
Figure 19: Valve Module Connections
Figure 20: Electrical Installation
Only the components shown in black are included in this kit.
Output Number
Normal Function
1
Left Up
2
Left Down
3
Right Up
4
Right Down
5
Option 1
6
Option 2
7
Roll CW
8
Roll CCW
