NOOA NO101B, Инструкция по эксплуатации

Страница: 5 / 40

7 6
Replacing Batteries
1. Open the battery compartment cover.
2. Remove the old batteries (if any).
Insert three AAA (1.5V) batteries (included).
Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in
the battery compartment.
3. Close the battery compartment cover.
The LC Display will show zero.
CAUTION
If the scale shows “ ”, it indicates that the batteries are too weak and it is time to replace the batteries.
Refer to the section "REPLACING BATTERIES" to replace batteries. Replace batteries at the same time,
do not mix the old batteries with the new battery.
Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals
and are subject to hazardous waste treatment rules and regulations. Dispose the batteries according to
the disposal instructions.
Initial Start-Up
HINT!
If no movement is detected on the weighing surface
for 1minute and no button is pressed, the scale will
automatically switch off.
Initial Start-Up
If the Pair-Up is successful. the symbol will be
shown on the LCD.
If the Pair-Up is not successful. the symbol “E1” will be
shown on the LCD.
Installing the App and Pair-Up
The specially-designed App is now available
for download from the App Store
.
You may search and install the app in your smartphone.
With the advanced Bluetooth 4.0 technology, the mobile or portable devices,
which are equipped with Bluetooth function in line with BLE Technical Specifications
as well as BLP Protocol which is established by global organization Bluetooth SIG,
are capable to receive your personal health data from your scale.
Simply install the specially-designed App "Lifesense International " on App
Store in your mobile or portable devices and pair up your scale, you may then enjoy a
comprehensive detailed health solution.
Turn on Bluetooth and App in your mobile or portable device.
Make sure both are set as ON during Pair-Up.
Press and hold the UNIT/ACTIVATION button at the rear of the scale
to activate the Pair-Up.
The symbol " and " will be shown alternatively on the display
to indicate the Pair-Up is proceeding.
Note: It is only available for the device which supports Bluetooth 4.0 technology.
Such as iPhone 4S, iPad mini,iPad 3, iPod touch 5 and newer generations.