NOOA NO101B, Инструкция по эксплуатации

Страница: 7 / 40

10
11
* Mother and Infant weighing mode
Operation Operation
Slide the MODE selector switch at the rear of the scale to select Mother and Infant
weighing mode.
Place the scales on a solid, flat horizontal surface. Do not place on a carpet or any soft
surface. Always make sure there are no other
objects beneath the scale before weighing.
Place even weight on each leg and do not move. The scale will automatically switch on
and the symbol will be shown on the display.
When the mother indicator is shown on the scale, the scale
is ready to measure the weight of the mother first. Stay still on the weighing paltform
and do not move. Moving during the weighing process can lead to discrepancies in
the results. The scales will start to measure immediately. The weight measurement
will be shown and flash on the display.
NOTE: The data will be transfer automatically to your pair- up mobile or
portable device.
After approx. 3 seconds, the weight of the mother is recorded and saved.
The infant indicator will be shown on the scale.
The scale will automatically reset to zero, which indicate the scale is ready
to measure the weight of the infant.
Now hold your baby in your arm and step onto the weighing platform. Place
even weight on each leg and do not move. The scales will start to measure
immediately. After flashing, the weight of the infant will be displayed.
After the weight of the infant is recorded and saved. The mother indicator will go off.
NOTE: The data will be transfer automatically to your pair- up mobile or portable
device.
HINT: When the data transfer is complete, the icon will go off. The scale will
display the measurement for about 10 seconds and then automatically switch off.
If the data transfer is not successful, the icon will show on the display and the
measurement will temporarily saved in the scale. .