Nonin Onyx II 9560 Скачать руководство пользователя страница 3

3

Symbol

Definition of Symbol

Remote Alarms; Not for Continuous Monitoring.

IP32

Protected against vertically falling water drops when enclosure is tilted up to 15 degrees and 
ingress of solid foreign objects greater than or equal to 2.5 mm (0.1 in.) in diameter per 
IEC 60529.

R

Bluetooth

®

Indoor use (France only)

Continua Certified™ signifies that this product has been tested and proven to be interoperable 
with other products that carry the “Continua Certified” symbol.

RoHS Compliant (China)

pin

Personal Identification Number

BDA

Bluetooth Device Address

Ver

Version

NOTE: 

 Where applicable, an additional label bearing your country radio communications license information will 

appear on the side of your device. This is not a serial number or device identifier.

Installing Batteries

Two 1.5 volt AAA-size batteries power the Model 9560 for approximately 600 spot checks. Nonin recommends using 
alkaline batteries (included with each new Model 9560). When batteries are low, the numeric displays flash once per 
second. Remove batteries if the device will be stored for more than 30 days. Replace low batteries as soon as 
possible, using the instructions below. 

NOTE: 

Rechargeable batteries may be used; however, they require more frequent replacement.

1. Hold the Model 9560 as shown in figure A. To release the device’s battery tray, press upward and then pull 

outward slightly with the thumb.

2. Remove the old batteries from the battery tray. Dispose of the batteries properly.
3. Insert two new 1.5 volt AAA-size batteries. Follow the polarity markings (+ and -) as illustrated in figure B. 

Proper positioning of the batteries is essential for operation.

4. Carefully guide the battery tray back onto the device. Press downward and then push inward slightly to re-

secure the battery tray. 

Do not force it into place; it fits only when properly positioned.

5. Visually inspect to ensure that the battery cover is properly placed.
6. Insert your finger in the device to verify operation. See the Activating the Onyx II 9560 and Verifying Operation  

section for more information. 

A

B

C

Содержание Onyx II 9560










Отзывы: