Section 5: Preparing for use (cont.)
Connecting the herbicide
box to the lance
•
Select an approved TDC
herbicide.
•
Read the label for full product
information and application
rates.
•
Shake the herbicide box
vigorously for at least one
minute in a circular motion.
•
Place the herbicide box in
the backpack with the bung
positioned facing down and
fasten the pack clips.
•
Return the backpack to an
upright position.
•
Remove the bung stopper.
•
Line the feed tube connector
up with the bung, placing your
fingers underneath the bung
and pushing the connector in
with your thumbs. The bung
will then be pierced.
•
IMPORTANT: Ensure that the
c-clip fits securely over all
three flanges as shown. The
connector could pull out if it is
not fitted correctly.
•
Position the backpack
comfortably on your back and
adjust straps as required.
Priming
ALWAYS PRIME THE LANCE
BEFORE USE
Priming fills the lance with
herbicide and removes air
bubbles, which could interrupt
the chemical flow or cause the
lance to drip.
14
