Section 4: Controls and Features (cont.)
Pacing control
•
When in the ‘OFF’ position,
the usage clock is visible on
the LCD readout for a short
time.
•
The calibrate position disables
the motor whilst calibrating.
•
The other positions are used
to set the lance to beep,
indicating when to step to
maintain the walking pace.
•
Using the pacer will ensure
the most accurate application.
However it is not essential for
it to be switched on during
operation and it can be turned
to the off position if preferred.
Spray width control
•
When in the ‘OFF’ position
the lance will not activate,
although the power is still on.
•
Disc positions indicate the
disc selection.
•
Turn the control clockwise
to increase the spray width
available for the disc selected.
10
