Nome nmas Simple, Руководство пользователя

Страница: 30 / 35

nmas Simple
Customer can access data with any PC connected to internet. Nmas-cloud can
manage multiple nmas LD units on multiple locations. All data transfer is
encrypted and password protected. Customer specified access page is created
for easy access.
Default configurations of nmas Simple
Factory settings for nmas Simple measurements are:
•
Unit identifier = Unit mac-address
•
Figure names = green signal, green vRMS, green BIAS
•
Figure names = blue signal, blue vRMS, blue BIAS
•
Figure names = red signal, red vRMS, red BIAS
•
Figure names = white signal, white vRMS, white BIAS
•
Sample length = 1,6 seconds (sample rate 10 kHz)
•
Visibility level of figures = signal=1 ; vRMS=1 ; BIAS=3
•
Warning level = 4,5 mm/s for vRMS
•
Alarm level = 11,0 mm/s for vRMS
Warning and alarm limits are based to ISO10816-3. These are general guide
rules and do not apply to all machinery. Please change warning and alarm
limits based to the machinery.
Configuring nmas Simple
nmas Simple unit can be configured from local display. Local display allows
user to change:
•
unit identifier
•
figure names
•
sample length
•
visibility level of figures
•
warning and alarm limits.
On local display:
1. Select desired figure on display by pressing Up/Down
2. Press Right to view trend
3. Press Right again to access configuration displayed
4. Use on-board keyboard to change values
Visibility setting is used to define in which nmas softwares figure is visible.
Page 30