8
7.
Remove the transportation straps
holding the base frame and running
frame.
Complete Assembly
13
To avoid damaging the treadmill, adjust the incline
to zero before you fold the treadmill. Then, remove
the key and unplug the power cord. CAUTION: You
must be able to safely lift 45 lbs. (20 kg) to raise,
lower, or move the treadmill.
1.
Hold the end covers firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs and
keep your back straight.
2.
Raise the frame until the lock tube locks in the
storage position. CAUTION: Make sure that the
locking tube locks. To protect the floor or carpet,
place a mat under the treadmill. Keep the treadmill
out of direct sunlight. Do not leave the treadmill in
the storage position in temperatures above 30° C.
Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the
locking tube is locked in the storage position. Moving the treadmill may require two people.
Hold the handrails with both hands and carefully push the treadmill to the desired location.
CAUTION: Do not pull on the frame, and do not move the treadmill over an uneven surface.
1.
Push the upper end of the frame forward, and gently press the
upper part of the storage latch with your foot at the same time.
2.
While pressing the storage latch with your foot, pull the
upper end of the frame toward yourself.
3.
Step back and let the frame lower to the floor.
Regularly clean the treadmill and keep the walking belt clean and dry. First, press the power
switch into the off position and unplug the power cord. Wipe exterior parts of the treadmill
with a damp cloth and a small amount of mild soap. IMPORTANT: Do not spray liquids directly
onto the treadmill. To avoid damage to the console, keep liquids away from the console. Then,
thoroughly dry the treadmill with a soft towel.
The walking belt is lubricated with a high-performance lubricant to reduce the friction
between the walking belt and the running board. If the lubrication is inadequate the belt will
not operate smoothly. Remove the key and UNPLUG THE POWER CORD. Run your finger
Содержание Run 8.0
Страница 1: ...USER S MANUAL...
