3
Fig. 3
2. Drop-mount
3. Hands-free wiring
(2) Drill two mounting holes in the ceiling joist.
Securely attach the mounting bracket to the ceiling, using
the two sets of long wood screws with flat washers .
Mounting Bracket
Flat Washer
Wood Screw
(2)
Note: Canopy picture may vary from product for some
styles of ceiling fans .
(1) Downrod assembly
Loosen the two downrod set screws and remove the
chip and connection pin from downrod coupling.
Insert the downrod through canopy and downrod stand
cover and pull lead wires through downrod (Fig. 2a).
(2) Securing assembly
Insert downrod into downrod coupling. Make sure to
align holes in downrod with the hole in the coupling.
Insert the clip into the connection pin until it snaps
into place. Tighten the screws in the downrod
coupling (Fig. 2b).
!
Fig. 2a
Fig. 2b
.
Carefully lift the fan assembly onto the mounting bracket.
Rotate the fan until the notch (b) on the hanger ball fits
against the ridge (a) on the mounting bracket (Fig. 3).
With the mounting bracket holding the fan assembly
follow wiring instructions (step 1).
a
b
7
3 Hands free wiring
Canopy
Downrod Stand Cover
Downrod
.
.
